As an important functional area in home life, bathroom naturally needs to pay more attention to decoration. In order to create a comfortable and warm sanitary space, you must know the following points.
The threshold is a gate to prevent water from overflowing from the bathroom. Its design and construction points are as follows: the upper plane of the threshold should incline to the inside of the bathroom so that the water drops can slide smoothly to the inside of the bathroom; the threshold should be the same width as the door frame, and the door frame should be the same thickness as the wall, so that there will be no big access when laying the floor tiles, and the chance of creating a breach will be relatively reduced.
2、 Floor waterproof
There are many kinds of waterproof materials. At present, waterproof agent is widely used. When laying the waterproof layer, it should be laid to about 20 cm above the wall foot, at least not lower than the height of the threshold. When there is a reserved pipe on the floor, the waterproof layer shall also cover the reserved pipe. After the floor is well waterproof and dry, it must be immediately bottomed with cement mortar or protected to prevent the waterproof layer from being damaged.
3、 Floor tile laying
There should be a drainage slope of about 1%, and the slope should face the water outlet under the floor; the floor tile joint should be consistent in thickness and aligned with the wall tile joint; when the front wall of the bathtub is tiled, the floor tile should be first pasted under the wall, and then pasted with the wall brick to avoid cracks.
Wash the face of the table to choose "all-in-one" (that is, the surface of the table material and internal material composition, color is the same), can not choose only one layer of surface rubber shell of the table, because only the surface rubber shell of the table can not be repaired once damaged. (to check whether the table top is "all-in-one", the light can be used to irradiate from the back at a close distance, and the transparent one is the "all-in-one" table top). In addition, seam sealer must be applied at the joint of the table and washbasin to prevent water from seeping out of the joint.
Generally, when installing the toilet, it is customary to fix the toilet with cement mortar. In fact, this method is wrong. After fixing the toilet with this method, the toilet cannot be disassembled again. If the pipeline is seriously blocked, only one way is to knock the toilet off.
6、 Exhaust fan
Generally, when people build houses, they don't pay much attention to the bathroom ventilation equipment, most of them just install an exhaust fan. The bad gas in the bathroom can't be discharged out of the room. It's still circulating in the bathroom. As an important functional area in home life, bathroom naturally needs to pay more attention to decoration.