Polished Aluminum Frame Flag Hinge G-F752

G-F752 Polished Aluminum Frame Flag Hinge In Six Photographed Positions

This listing is written from the six photographs on this page, and what they show is a flat stamped flag hinge of the cabinet hinge range in a polished bright finish, the member of the range cut for aluminum frame cabinet and door work: the folded three quarter view where the slot hole plate, the body and the ribbed knuckle all read at once, the vertical front view where the L screw feet stand at one end and the threaded body runs down to the plate, the folded view from the opposite side where the hinge runs the other way, the two open views where the ribbed barrel knuckle and the two slot hole plates open out to the camera, and the side profile where the L feet and the plate stack are the whole of the frame. Two honesty points govern the whole page. First, this set carries no drawing frame, so no dimension figure is stated anywhere on it: the plate figure, the body figure and the foot figure are drawing facts that we issue with the quotation, and the page says so instead of guessing them. Second, no damper is readable as a part in any of the six frames, so the hinge is carried as a free swinging hinge, and the closing is the fact confirmed on the sample rather than the page.

The frames prove the structure directly: a flat stamped mounting plate with an oval slot hole and a round countersunk hole, a body that carries the swing, a ribbed barrel knuckle where the two leaves of the hinge meet, and L shaped screw feet at the end of the body that fix the hinge to the door strip. That is the flag hinge form in its flat stamped expression, and the slot hole in the plate is what makes the fixing adjustable: the screw runs in the slot and the position of the hinge against the frame is trimmed at the fitting rather than at the workbench. An aluminum flag hinge of this shape is the cabinet hinge member for the door that hangs on an aluminum profile frame, and the flat stamped plate is the part that answers to that frame.

The Aluminum Frame Application, As The Hinge Is Cut For It

A flag hinge of this range exists for the door that hangs on an aluminum profile frame rather than on a wood case. Where a square wood cabinet door runs on a cup of the range, there are doors that hang on the extruded frame of a display case, a machine enclosure, a workbench cabinet, a kitted furniture unit or an industrial cabinet, and the aluminum flag hinge is the cabinet hinge member that carries the leaf on the flat stamped plate and the screw feet instead of on a bored cup. The open frame on this page is where the flat stamped construction reads: the plate is a stamped leaf with the slot hole for the fixing and the round countersunk hole for the screw head, and the two plates open on the ribbed barrel between them the way a flag opens on its bar. The buyers who reach for an aluminum flag hinge are the ones whose frame already answers the question: the display case of an aluminum profile run, the enclosure door that must open for service, the kitted furniture unit that is assembled on site rather than shipped closed, and the workbench cabinet of the workshop where the frame is profile rather than board.

Because the fixing answers to the frame and not to a bored cup, a case built for a cup is not a case ready for this hinge without the frame being rechecked: the leaf of the door, the profile of the frame and the fixing of the plate all answer to the shape of the frame. That is why the model number carries the application the way it does, and why the comparison between this aluminum frame flag hinge and the cup members of the range starts with the frame drawing rather than with the photograph. A wood door bored for a cup is a door that meets the flat plate of the hinge before it clears the profile, and the frame is where the two are told apart.

What The Photographs In This Listing Prove

Every structural claim on this page can be pointed at in one of the six frames: the slot hole plate in the folded three quarter view, the L screw feet and the threaded body in the vertical front view, the opposite side of the hinge in the second folded view, the two plates open on the ribbed barrel in the open views, and the plate stack with the L feet in the side profile. What the frames do not prove is any figure: there is no drawing in this set, so the plate length, the slot width and the body length are not numbers on this page. They come from the hinge drawing that we send with the quotation, and the fixing is done against that drawing rather than against the photographs.

The staged set also omits, on purpose, the remaining frames of the folder that repeat the same six camera positions from nearer or farther, and the multi piece composite frame, which the page keeps out of the gallery so that each of the six positions on the page is a distinct view rather than a repeat of one. What remains is six different views, and each of the six views is used once in the image gallery on this page.

How The Flag Hinge Is Built

The side profile frame is the clearest frame for reading a flag hinge, and the frame on this page is that frame: the L screw feet, the ribbed barrel knuckle, and the two flat stamped plates stacked at the other end. Three things about this construction are worth a buyer knowing before the drawing arrives. First, the slot hole in the plate is the adjustment of the hinge: the screw runs in the slot and the fixing of the hinge against the frame is trimmed by hand at the fitting, which is the difference between a flat stamped plate hinge and a fixed plate. Second, the ribbed barrel is the pivot that carries the swing of the door leaf, and the ribs of the barrel are the part that the fitter feels when the swing is worked by hand. Third, the L screw feet fix the hinge to the door strip at the end of the body, and the feet are the reference the fitter works when the hinge is aligned at the frame.

• Flat stamped mounting plate with an oval slot hole and a round countersunk hole, the aluminum flag hinge fixing shown in the folded three quarter view.
• Slot hole as the position adjustment, the screw runs in the slot and the fixing trims against the frame at the fitting.
• Ribbed barrel knuckle as the pivot, carrying the swing of the door leaf, shown open in the two open views.
• L shaped screw feet at the end of the body, the member that fixes the hinge to the door strip.
• Threaded adjustment in the body, the setting the fitter works when the hinge is trimmed at the frame.
• Polished bright finish as the six frames show it, even across the plate, the barrel and the feet.
• Free swing closing, no damper part readable in any frame, the offset member of the family listed under its own model number.
• No drawing in this set, so no dimension figure on this page; the figures come with the quotation.

Free Swing, As The Frames Show It

No damper is visible as a part in any of the six frames, so the page carries the closing the honest way: this flag hinge is a free swinging hinge. The door opens on the ribbed barrel and closes by its own weight of the leaf and the hand of the person at the door, not by a damping mechanism. The same family is also offered as an offset member under its own model number, so a buyer who wants the offset geometry on this flat stamped shape says so on the order and that member is the specification; the free swinging member of the frames is the call for the door where the closing is not the question. The sample is where the swing is worked and the closing is confirmed, and the closing is the fact that comes back from that test rather than from the page.

Polished Finish, As The Frames Show It

The six frames show a polished bright finish across the plate, the barrel and the feet, and that is the finish fact the page carries, because the finish is what a photograph can certify. The alloy under the finish is a drawing fact, and the flat stamped shape of the hinge is the member of the family that the frames show: the offset member of the same family is listed under its own model number, G-F439, and the two members are told apart by the geometry of the body rather than by the finish of the plate. For the polished member the honest case is the one every buyer of a polished hinge knows: the finish is an interior one, the hinge is made for the dry cabinet and the dry enclosure rather than the hosed surface, and the environment it is specified for is the one the frames show it in. Where the environment is wet, the drawing lists the finish of each member so the order states it rather than assumes it.

Where This Hinge Is The Right Call, And Where It Is Not

A flat stamped flag hinge of this shape belongs on the door that hangs on an aluminum profile frame: the display case of a profile run, the enclosure door that opens for service, the kitted furniture unit assembled on site, and the workbench cabinet of the workshop. The open frame on this page is the fastest way to read what the flat stamped plate is doing in a real frame: the plate on the profile, the feet at the door strip, the leaf held on the barrel the way the hinge is cut. It is the wrong call for a wood door bored for a cup, because the flat stamped plate is a hinge for a frame and a bored door is a hinge for a cup, and the two are told apart by the door rather than by the finish. It is the wrong call for a door that is too heavy for the plate fixing the drawing states, because the plate and the feet carry the leaf and the figure on the drawing is where the weight question is answered, and it is the wrong call for a wet environment, because the polished finish of the frames is an interior finish.

How This Hinge Sits In Our Range

Within our own hinge range, a buyer choosing an aluminum frame door hinge is choosing between the geometry of the body, the closing and the finish, in that order. The geometry sets the frame: the flat stamped plate of this flag hinge is the member for the profile frame, and the cup members of the range are the members for the bored wood door. The closing sets the behaviour: the free swinging member of the frames is the hinge for the door where the closing is not the question, and a damped member of the family is the hinge for the quiet landing where one is specified. The finish sets the environment: the polished member of the frames is the interior call, and the drawing is where the finish of each member is stated. A buyer comparing this hinge against our other aluminum frame members should compare the geometry first, because the flat stamped plate is the part that answers to the profile and the frame is where it shows up.

It also sits against the offset member of the same family, and the honest position is the one on the specification table: the flat stamped plate and the slot hole are the comparison that matters, the finish is what the frames show, the closing is what the frames state by the absence of a damper, and the plate figure is what the drawing carries rather than what the page guesses. A buyer who needs the same flat stamped shape in a different geometry or the same geometry in a different finish should say so on the order, because the line is built around those choices and the drawing is what ties the choice to the part number.

Specification Summary

How Each Hinge Batch Is Checked Before Packing

Every hinge batch is sampled on four points before packing. Assembly: the plate is checked to open true on the ribbed barrel, the L feet are checked to sit square to the body rather than twisted, the slot hole is checked to run clear along its length and the threaded adjustment is checked to run in its setting rather than proud. Appearance: the polished surface is checked for handling marks and any scratch that runs across the plate or the feet, which is the part that shows first in a lit frame, and the finish is checked to run even across the barrel and the plate. Function: each sampled hinge is worked through its full swing by hand, opened on the barrel and closed on the free swing, so a binding barrel or a swing that runs short shows up before the carton closes, and the slot hole is checked to take the fixing screw through its full length. Packing: carton quantity, inner bag, marking and the model number on the label are checked against the order rather than the previous job, and the documents a buyer needs at their own customs are issued with the proforma.

Who Supplies This Hinge

This hinge is supplied by Guangzhou Gorgeous Intelligent Technology Co., Ltd., a furniture and architectural hardware business whose range covers hinges, drawer slides, handles, stays, legs, castors, locks and the fitting sets that go with them. The company works to export orders: quantities, carton marking, barcodes and shipping documents are agreed before production rather than after it, and a buyer who specifies the geometry, the closing and the finish on the order gets those things made, because that is the only specification the factory works from.

Terms Worth Agreeing Before Two Hinges Are Compared

• Flag hinge: a flat stamped door hinge whose plate and screw feet fix to a frame rather than to a bored cup, the form shown in the six frames.
• Aluminum flag hinge: the aluminum frame application of the flag hinge, the member of the range cut for the extruded profile frame of display, enclosure and kitted furniture work.
• Cabinet hinge: the application of this part, the leaf of a cabinet, enclosure, display case or workbench unit that swings on the ribbed barrel.
• Slot hole: the oval hole of the plate, the member that carries the position adjustment of the hinge against the frame.
• Ribbed barrel: the knuckle of the hinge, the part that carries the swing of the door leaf and shows the ribs in the open views.
• L screw feet: the feet at the end of the body, the fixing of the hinge to the door strip that the fitter works at the frame.
• Free swing: the closing of this member, no damper part readable in any frame, the door closing by the weight of the leaf rather than by damping.
• Drawing: the document that turns a hinge photograph into a hinge specification; without it the plate, slot and body figures are not checked, and we send it with the quotation.

The Parts Of The Hinge, Named As The Frames Show Them

• Plate: the flat stamped leaf with the slot hole and the round countersunk hole; the plate is where the hinge meets the frame, and the folded three quarter view is the frame where the plate reads at its best.
• Slot hole: the oval hole of the plate; the fixing screw runs in the slot and the position of the hinge against the frame is trimmed at the fitting, and the open views are the frames where the slot reads to the camera.
• Ribbed barrel: the knuckle pivot that carries the swing of the door leaf; the side profile is the frame where the barrel stands between the two plates.
• Body: the member that carries the swing and holds the threaded adjustment; the vertical front view is the frame where the body runs down between the feet and the plate.
• L screw feet: the feet at the end of the body that fix the hinge to the door strip; the feet are shown standing at one end in the front view and at the near end in the side profile.
• Threaded adjustment: the setting in the body that the fitter works when the hinge is trimmed at the frame; the front view is the frame where the thread reads at its best.
• Swing: the arc the door works on the barrel from the closed face of the door to the open position; the swing is carried by the ribbed barrel, and the sample is where the swing is worked through its full arc.
• Free swing: the closing the member carries by the absence of a damper; the closing is by the weight of the leaf, the frames show the body rather than a damping mechanism, and the sample is where the closing is confirmed.
• Polished finish: the finish the frames show across the hinge, even on the plate and the feet; the finish is the photograph fact, and the drawing is where the alloy under the finish is stated.
• Fixing: the screws that take the plate to the frame and the feet to the door strip; the fixing is sized to the profile and the board on the order, and the drawing lists the specification we would ship.

Common Hinge Faults And What They Actually Mean

A door that drifts on a flag hinge is almost always a fixing problem rather than a hinge problem. The hinge is the strongest part of that joint; the profile and the plate behind it are not. In an aluminum frame the holding power depends on the fixing of the plate in the profile and the screws of the feet at the door strip, and a hinge that has been fitted and refitted while a fitter chases the line of the frame loses grip, which shows up later as the door of the hinge sagging at the strip while the hinge itself is still sound. On a flat stamped hinge of this shape the drift can look like the door not reaching the frame, and the answer is still the fixing of the hinge and the profile, not a heavier hinge.

A door that will not reach its frame is usually a layout question before anything else: the leaf of the hinge, the profile of the frame and the slot hole have to be built to the shape of the hinge, and a door of the hinge that meets the plate of the hinge early is the classic sign of a leaf cut wide or a profile built narrow. The frame on this page shows the hinge at the shape the flat stamped plate was cut for, and the check is to work the door against the hinge before the plate of the hinge is fixed, because correcting a door that was never cut to the frame after the fixing of the hinge is done costs more than the hinge. A swing that feels tight on the barrel of the hinge is a different question: it is the alignment of the hinge against the frame, it is checked on the sample of the hinge in the buyer's own door, and it is the fault a fitter notices before a buyer does.

The faults that actually do come from the hinge are the plate of the hinge, the barrel of the hinge and the feet of the hinge: a plate fixed crooked in the profile, a barrel that seats cross loaded through the swing, a foot that runs proud of the door strip, and slot screws driven over the top instead of home. None of those is a hinge defect, but they all show up as one, and the way to keep a polished flag hinge working is the same as the way to keep any hinge working, which is to fix the hinge true the first time with the plate of the hinge in its profile and the feet of the hinge square to the strip.

Questions Buyers Ask About This Hinge

• Is this hinge a flag hinge or a cup hinge? It is the flag hinge member of the range: the flat stamped plate and the L screw feet fix the hinge to a frame and a door strip, and there is no bored cup in any of the six frames. The cup members of the range are the hinges for the bored wood door, and the two are told apart by the door rather than by the finish of the hinge.
• What frame is this aluminum flag hinge for? The aluminum profile frame, the line designation of the model number: display cases, machine enclosures, workbench cabinets and kitted furniture units that hang their doors on extruded profile rather than on wood board. The section of the profile is agreed on the order, because the slot hole of the plate and the feet of the hinge answer to the profile rather than to a cup recess.
• Is this hinge soft close? No damper is readable as a part in any frame of the hinge, so the page carries the closing of the hinge as free swing: the door of the hinge closes by the weight of the leaf. A damped member of the family is available where the quiet landing is wanted, and a buyer who wants it on this flat stamped shape says so on the order and that member of the hinge is the specification.
• What is the difference between this G-F752 and the G-F439 you list in the same family? The two members are told apart by the geometry of the body: this listing is the flat stamped flag hinge of the six frames with the slot hole plate and the L screw feet, and the G-F439 is the offset member of the family with its own body shape. The polished finish of the hinge and the free swing closing of the hinge are the shared facts of the frames, and the geometry is the choice, with the drawing of the hinge stating the shape of each member.
• What is the plate size of this hinge? The plate figure of the hinge is a drawing fact and this photograph set of the hinge carries no drawing, so the page of the hinge does not state the figure rather than guess it. The drawing of the hinge comes with the quotation, and the fixing of the hinge is done against it.
• Do the fixing screws come with the hinge? The frames do not show screws staged with the hinge, so the copy carries it that way: the fixing screws of the hinge are agreed on the order, sized to the profile and the door strip, and the drawing of the hinge lists the specification we would ship so the screws match the slot hole and the feet of the hinge.
• How many do I need on a door? The count follows the length and the mass of the leaf, the usual working rule being one hinge per standard door height and a second hinge where the leaf runs long or carries the weight of a run. The figures that govern the count of the hinge come from the drawing of the hinge and the sample worked in the buyer's own door, not from the photograph of the hinge.
• Will the polished finish of this hinge hold up in a workshop? In a dry workshop, yes, and the polished finish of the frames is the interior call the hinge is built for. Where the surface is hosed or the environment is wet, the drawing lists the finish of the hinge so the order states it rather than assumes it, and the finish of the member is the specification on the order.
• What does the slot hole of the plate do for me? It carries the position adjustment of the hinge: the fixing screw runs in the slot and the position of the hinge against the frame is trimmed at the fitting rather than at the workbench. On a fixed plate hinge of another range the position is set at the fitting and cannot move; on this flag hinge the slot hole is the member that keeps the hinge adjustable after the door is on the frame.
• Can I use this hinge on a wood door? The flat stamped plate and the L screw feet are cut for a frame and a door strip, and a wood door bored for a cup is not a door ready for this hinge without the fixing being changed to the profile. The cup members of the range are the hinges for the bored wood door, and the two are told apart by the door rather than by the finish of the hinge.

Sign-Off Checklist Before You Order This Hinge

• Frame of the hinge confirmed as the aluminum profile of the order, the section of the profile agreed against the slot hole and the feet.
• Door material confirmed against the fixing of the hinge, the leaf of the door cut to the frame rather than to a cup recess.
• Hinge count confirmed against the length and the mass of the leaf, the second hinge where the leaf of the hinge runs long.
• Free swing closing confirmed in writing against this member of the hinge, the damped member of the family selected where the quiet landing is wanted, the closing to be confirmed on the sample.
• Finish confirmed as the polished member of the frames of the hinge, the finish of the wet service member selected where the environment is wet.
• Sample of the hinge worked through the full swing in the buyer's own door before the production order is cut, the barrel of the hinge and the slot hole of the hinge both checked.
• Fixing of the hinge sized for the profile and the door strip, so the plate of the hinge sits true and the feet of the hinge hold through the swing.
• Drawing of the hinge received against the order, the plate, slot and body figures of the hinge checked before the fixing is cut.

Ordering

Send the model number G-F752 with the quantity, the destination port and the carton marking you need. Samples are available before a production order so the swing of the hinge can be worked in your own door, the free swing closing of the hinge confirmed against the leaf, and the slot hole of the hinge checked at the frame, which is the fastest way for both sides to agree that the plate, the barrel and the feet of the hinge are right. The drawing, the fixing sheet and whatever test documentation we hold for this hinge model are issued on request, and delivery and payment terms are agreed order by order on the proforma rather than assumed from a previous order.