Short Wall Cabinet Door Hinge Nickel Plated - F725

Product Overview — F725 Short Wall Cabinet Door Hinge

TheF725 short wall cabinet door hinge is a concealed euro-style cabinet hinge built for door panels that cannot accept a full height hinge cup. Its pressed cup has a reduced wall height, so the mini wall hinge sits correctly in shallow or thin material where a standard deep-draw cabinet hinge would break through the face of the door, bulge the laminate, or leave too little material for the fixing screws. Machined from cold rolled steel plate and finished in nickel, this short wall hinge keeps the geometry, the clip-on joint and the adjustment range of a normal cabinet hinge while solving the drilling-depth problem on thin fronts.

Guangzhou Gorgeous Intelligent Technology Co., Ltd. supplies this short cup cabinet hinge to kitchen factories, flat-pack furniture producers, aluminium frame door fabricators and hardware importers who need one reliable cabinet hinge specification for thin door programs. The short wall cabinet hinge uses the standard concealed hinge set-out, so your existing boring machine, your existing front drilling gauge and your existing assembly instructions all remain valid — only the cup wall height changes, which is exactly what thin door stock requires.

F725 short wall cabinet hinge — showing the low cup wall, clip-on arm and compact mounting base

What “Short Wall” Means and When You Need It

Every concealed cabinet hinge has a drawn cup. On a standard cabinet hinge that cup wall is tall enough to bury itself in a 18 mm door and still leave the screw holes inside solid material. On a 12 mm door, an aluminium profile door, a honeycomb panel or a thin MDF craft front, the same hinge wall has nowhere to go: it either prints through the opposite face or the installer stops short and the hinge sits proud. The F724 and F723 mini cup hinges solve this by shrinking the diameter. The F725 solves it a different way: it keeps the familiar cup diameter but reduces the wall height, so the required drilling depth drops while the screw engagement around the hinge flange stays full width.

Choose this short wall hinge rather than a mini cup hinge when your door has normal edge width but insufficient thickness, and choose it rather than a standard cabinet hinge whenever the calculated bore depth would leave less than 1.5 mm of material behind the hinge cup. On sample approval we will confirm the exact bore depth for your panel, because the correct depth for a short wall cabinet hinge depends on the density and facing of the board, not on the hingealone.

Key Features and Benefits

• Reduced cup wall height — the defining feature of this short wall hinge; drills shallower than a standard cabinet hinge so thin doors survive the bore.
• Cold rolled steel (Q195–Q235) — plate pressing holds the hinge knuckle geometry tight, so the door hangs square and stays square.
• Nickel plated finish — even colour across cup, arm and base, tolerant of handling and light humidity.
• Clip-on detachable joint — the hinge arm releases from the base without tools for door removal, cleaning and service.
• Compact short base — the paired mounting base is proportioned to the short wall cup, so the whole hinge set fits narrow rail heights.
• Three-dimensional adjustment — lateral and depth screws on the hinge base allow front alignment after the door is hung.
• Overlay choice — full overlay, half overlay and inset cranking available for the same short cup hinge.
• Standard set-out — bores on the same concealed hinge gauge as the rest of our cabinet hinges, with no re-tooling of your boring machine.
• OEM / ODM welcome — logo stamping on the hinge cup, custom plating, custom screws and retail or bulk packing.

Technical Specifications

Values above are manufacturing reference figures for the F725 short wall hinge. The drilling template, bore depth and screw length are confirmed against your actual panel before production, because thin-door results depend on board density and facing as much as on the hingeitself.

Front elevation of the short wall cabinet hinge — cup, arm and compact base in one plane

Short Wall Hinge Compared With Our Other Cabinet Hinges

Send the door material, thickness and weight and we will tell you which cabinet hinge in this family fits, instead of letting your production guess with the wrong hinge. That single check removes the most common cause of concealed hinge returns in export furniture programs.

Materials, Plating and Service Life

TheF725 short wall hinge is pressed from cold rolled steel, then plated with nickel over a copper undercoat on all visible surfaces. Cold rolled stock is specified rather than hot rolled because the wall of a short-draw hinge cup is thin work: plate thickness variation shows up immediately as a cup that sits proud or a flange that is not flat against the bore shoulder. Each pressing lot is sampled for wall height, flange flatness and screw-hole position, so every short cup hinge in the carton sits at the same depth in the same door.

Nickel is chosen for this cabinet hinge because it colours consistently across three separately plated parts, which matters when the cup, the arm and the base of one hinge set are visible together on a light interior door. For coastal, marine, RV and bathroom applications we can build the plating up to a specified salt-spray grade or add a coloured top coat such as black nickel, bronze or gold on the same short wall cabinet hingetooling.

Installation Procedure

1. Set out the door.Planhinge positions with the top and bottom hinge 100–150 mm from the corner, then space any intermediate hingeevenly.
2. Set the depth stop. This is the critical step on a short wall hinge: set the boring bit to the confirmed depth so the flange sits exactly flush with the door face.
3. Drill the bore. Use a sharp Forstner or hinge-boring bit; a dull bit burns the facing and lifts laminate around the hingeseat.
4. Check the remaining back wall. Hold the door to the light after the first bore; you should still see an unbroken facing layer behind the hingecup.
5. Fit the hinge cup. Press the short wall hinge cup into the bore and drive the two supplied screws through the flange holes.
6. Fix the base. Screw the compact base to the carcass side panel into the slotted holes so lateral adjustment stays available.
7. Clip on and adjust. Press the hinge arm onto the base until it seats, then set the gap with the lateral screw and the door-to-carcase contact with the depth screw.
8. Cycle the door. Ten open-close cycles; a correct hinge swings evenly with no binding at full 95–105° travel.

Base-side view — the compact mounting plate that pairs with the short wall hingecup

Typical Applications

• Aluminium framed and thin-front kitchen doors where a deep hinge cup cannot be buried
• Honeycomb and tubular core panel furniture programs
• 12 mm MDF, plywood and craft doors in wardrobes and vanities
• Lacquered, PET and acrylic fronts that print through with a deep bore
• Retail display joinery, medical cabinets and laboratory casework
• Caravan, RV and boat cabinetry built to reduced panel thickness
• Replacementhinge for imported furniture originally specified as a short wall cabinet hinge

OEM, ODM and Wholesale

We manufacture this short wall hinge for hardware brands, distributors and furniture factories under their own marking. Available customisation on the F725 cabinet hinge includes logo stamping or laser marking on the cup and arm, plating colour and salt-spray grade, alternative screw packages for chipboard, MDF or aluminium profiles, blister, colour box or bulk inner packing, barcode and shelf-ready retail cards, and fully neutral packing for re-export. Customer-developed tooling is never sold to a third party, and drawings are handled under NDA when required. Most new buyers open with a mixed sample set of the short wall cabinet hinge across full overlay, half overlay and inset so a single shipment covers the whole door range.

Quality Control

• Material — steel grade, strip thickness and hardness verified per heat lot before the hingedies.
• Pressing — cup wall height, bore diameter, flange flatness and knuckle alignment on a sampling plan.
• Plating — coating thickness, cross-cut adhesion and colour match between cup, arm and base.
• Corrosion — neutral salt spray sampling against the agreed protection grade.
• Cycling — automated open-close testing of the clip-on hinge joint, logged per batch.
• Torque — screw pull-out and adjustment-screw torque checks on the hingebase.
• Pre-shipment — AQL sampling on quantity, accessories, packing and appearance; third-party inspection welcome.

Quality system certification covering cabinet hinge and furniture fitting production

Packaging and Delivery

Standard packing for the F725 short wall hinge is one hinge cup, one compact base and the matching screws per polybag, ten bags per inner box and one hundred pieces per export carton, with desiccant and an outer rated for ocean freight. Loose bulk packing, colour box, blister card and custom carton marking are all available, and we issue the packing list with cube and gross weight at quotation stage so your forwarder can plan consolidation on the hinge order without guesswork.

Export packing and container loading preparation

Manufacturing Capability

Our plant runs progressive-die pressing, robotic welding, automated plating and CNC machining across the hardware families we supply, including concealed cabinet hinges, drawer slides, handles, legs, castors and architectural stainless fittings. That breadth lets us ship a complete furniture-fitting package on one consolidation, which lowers your freight cost and keeps the hinge and handle finish matched across the whole project.

Production and CNC workshop

OEM / ODM development for hardware brands and furniture factories

Meeting buyers at international furniture and building-materials exhibitions

Frequently Asked Questions

Q1. What exactly is a short wall hinge?
It is a concealed cabinet hinge whose cup has a lower drawn wall than standard, so the bore can be shallower. That keeps the facing intact on thin doors while the hinge flange still gets full-width screw engagement.

Q2. Should I use the F725 short wall hinge or the 26 mm mini cup hinge?
If your problem is door thickness, use this short wall cabinet hinge. If your problem is a narrow stile or rail with no edge room, use the 26 mm mini cup hinge. Where both constraints exist, send the drawing and we will confirm the hingespecification.

Q3. Will a shallow bore weaken the hinge holding power?
Not when the flange sits on unbroken material. The short wall hinge is designed so the fixing screws stay in solid board, which is why the bore depth check in step four of the installation list matters more than the hinge choice itself.

Q4. Which door thickness range suits this hinge?
Roughly 10–12 mm up to 18 mm. Below that, screw hold rather than cup depth becomes the limit and we will propose an adhesive-backed or through-bolted hinge solution instead.

Q5. Is a soft-close version available?
The F725 is listed as a standard slide-on clip cabinet hinge. If your program needs damped closing on thin doors, tell us the door weight and height; we will confirm whether an inline damper or a hydraulic hinge from our 35 mm range is the reliable route.

Q6. Can we order the hinge with our own screws and packing?
Yes. Screw gauge and length, cup marking, plating colour and carton printing are all changeable on this short wall hinge, and we supply the revised hinge data sheet with the confirmed order.

Contact and Next Steps

If your thin-door program needs a concealed short wall cabinet door hinge in cold rolled steel with nickel finish, the F725 is tooled for volume output and available for immediate sample dispatch. Send the panel material, thickness, door weight, required overlay and annual volume and we will return a quotation with the drilling template, screw specification, packing data and container loading plan for this short wall hinge, together with matching cabinet hinges from the wider furniture-hinge range.