0
image
image
image
image
3 fold drawer slides

Double Spring Soft Close Drawer Slide Black 4519

4519
4519 is a black steel drawer slide with two springs in the buffer housing, a three fold ball bearing runner with full extension and side mounting, for kitchen drawers, cabinet drawers and workshop storage.
Country of Origin
China
Quantity:
Contact Now
add to cart
All Products

The 4519 Double Spring Buffer Drawer Slide

The 4519 is the double spring version of the buffered slide: two springs sit in the housing and share the last part of the close, so a wide drawer comes in square instead of arriving on one corner. The rail is black through the run, and the runner is three fold with full extension.

4519 black steel drawer slide pair, double spring buffer and three fold runner

At A Glance

Item4519
MaterialSteel
TypeThree fold ball bearing slide
BufferDouble spring
ExtensionFull
MountingSide mount
FinishBlack

Two Springs Instead Of One

The two springs are the reason this slide is specified on a wide drawer rather than the single spring part.

  • Both springs take the close together, so the drawer is pulled in evenly across its width.
  • A wide drawer that hangs slightly will still settle square on this slide.
  • The springs are assembled and checked at the factory, so there is nothing to balance on site.

Why The Rail Is Black

The whole runner is finished black, which is the finish a dark carcass or a black display unit needs.

  • The mounting faces are black too, so the slide disappears into a black drawer side.
  • A black slide does not show handling marks the way a bright one does.
  • The same slide is available in bright steel as the 4510 if the carcass is light.

Three Fold, Full Extension

A three fold slide carries the drawer out to full extension, so the back of the drawer comes up into reach.

  • The whole drawer box is accessible, which matters on a deep pan drawer.
  • The sections stay supported at full travel, so the drawer does not dip at the end.
  • The runner screws to the side of the drawer box, which suits a standard cabinet build.
Close up of the 4519 slide, black rail face, holes and buffer housing

Fitting It

The slide is fitted level and square, and a buffered slide that runs badly is almost always one that was not.

  • Set both slides on the drawer box before either is screwed down.
  • Keep the screws in the slotted holes until the drawer runs true, then tighten.
  • Leave the buffer end clear so the drawer travels fully home.

The Limits

This is a cabinet slide and it is sold as one.

  • No load figure is printed on the frames, so the rating is quoted on the order rather than claimed here.
  • It is not a runner for a vehicle, a tool chest or an industrial rack.
  • For a drawer that is stood in or climbed on, a heavier slide is the right part.
The 4519 slide extended, inner member and side mount holes

Sizes And Ordering

The slide is made to the cabinet, so the length follows the drawer depth rather than being guessed.

  • Give the drawer depth with the enquiry and the length is matched to it.
  • Say how many pairs, because the two slides of a pair are packed together.
  • Screws are quoted with the order if they are wanted in the same carton.

What Buyers Call It

The same slide is asked for under several names, and any of them reaches the same part.

  • Double spring soft close drawer slides, when the buffer is the point of the order.
  • Side mount drawer slides, when the fixing is what the job is matched to.
  • 3 fold drawer slides, when the travel and the section count are being compared.

The 4519 is a black steel drawer slide with a double spring buffer, three fold, full extension and side mount.

State the drawer depth and the number of pairs, and the slide is checked before it is packed.

Who Makes The Slide

The 4519 is made by Guangzhou Gorgeous Intelligent Technology Co., Ltd. and exported under the Gorgeous Hardware name: three production bases in Guangdong, stamping, ball assembly and finishing in house.

The panels below are the plant and the paperwork behind every slide on this page.

Eighty Countries, Six Numbers

Gorgeous Hardware world map of more than eighty export countries with six company statistics

Three Production Bases

Gorgeous Hardware factory gate and twelve production floor photographs from storage to container loading

The Certificates, And What Each One Covers

ISO 9001, ISO 14001 and ISO 45001 certificates with SGS, Intertek and RoHS test reports

Headquarters, Showrooms And Design

Guangzhou headquarters, hardware showroom, architectural display centre and design office

Where To Meet Us, March To December

Gorgeous Hardware trade show booths and the March to December exhibition calendar

Four Carton Options, And The Delivery Window

Four carton options from sticker service to OEM box and the six step delivery timeline

OEM, Brochures And Display

OEM logo on a hinge cup, brochure design pages and a branded display stand

Frequently Asked Questions

What length should I order?

The length follows the drawer depth, so give the depth with the enquiry and the slide is matched to it.

What is the difference from the single spring version?

One extra spring in the same housing. Both springs share the close, which is what a wide drawer needs.

Is it only made in black?

The 4519 is the black part. The same body in bright steel is the 4510.

Are screws included?

No. Screws are quoted with the order if they are wanted in the same carton.

Can it go in a bathroom or a boat?

The grade is quoted on the order, so say where the slide is going before the carton is made up.