H600 Concealed Two Section Locking Drawer Slide
The H600 Concealed Two Section Slide
The H600 is the concealed slide in its simplest form: two members, one of them screwed to the cabinet on a perforated plate, and a spring pin at the front that holds the drawer box in place. Nothing of it is visible once the drawer is closed, which is the whole point of putting the slide underneath instead of on the side.
At A Glance
| Item | H600 |
| Material | Steel, plated |
| Type | Concealed two section slide |
| Mounting | Under the drawer box |
| Fixing | Perforated mounting plate |
| Lock | Spring pin at the front end |
| Damper | None |
| Packing | Pairs |
Two Sections Under The Drawer
Two members mean one travelling part, so the drawer comes out to the end of the slide rather than clear of the cabinet.
- Two section drawer slides are what a shallow drawer box wants: less hardware under the box and less depth lost to the slide.
- The plate spreads the load along the cabinet bottom instead of pulling on two screws at the back.
- The slide runs under the box, so the drawer sides stay flat and the box keeps its internal width.
The Spring Pin
The pin at the front end of the inner member is the locking part: it drops into the drawer box and holds it, so the box does not creep off the slide as the drawer is worked.
- A concealed drawer slides with lock of this kind is held by the pin rather than by a clip on the side, which is what makes the fixing invisible.
- The pin is spring loaded, so the box goes on by pressing and comes off by releasing it.
- The pin also stops a drawer from being lifted out by accident when it is pulled hard.
The Perforated Plate
The plate is pierced in rows, so the slide can be set to the drawer line that the cabinet actually has rather than the one on the drawing.
- The rows of holes take a standard screw, so no special fixing is needed.
- The plate is flat, which is what keeps the slide out of sight under the box.
- Screws go in through the plate first, and the slide is lined up afterwards.
Fitting It
A concealed slide is set from the cabinet bottom, so the order of the work decides whether the drawer ends up square.
- Set the cabinet square and mark the drawer line on both sides before the first screw goes in.
- Fix the plate with the screws loose, set the drawer box on the slide and press until the pin catches, then tighten from the back forwards.
- Open and close the drawer loaded once before sign off, and check the pin releases the box when the drawer has to come out.
The Limits
This is a cabinet slide and it is sold as one.
- No length and no load figure are printed on the frames, so both are quoted on the order.
- Two sections do not give full extension; where the whole drawer has to come clear of the cabinet, the three section slide in the range is the part to order.
- A drawer that is stood in or climbed on needs a heavier slide than this one.
Ordering
The slide is matched to the drawer box, so the box depth and the length wanted are agreed before the pair is packed.
- Give the drawer box depth and the cabinet width with the enquiry, and the slide is matched to it.
- Say how many pairs, because the two hands are packed together and quoted as a pair.
- Screws are quoted with the order if they are wanted in the same carton.
What Buyers Call It
The same part is asked for under three names, and any of them reaches this slide.
- Two section drawer slides, when the travel is what the drawing sets out.
- Concealed drawer slides with lock, when the fixing has to be hidden and the box has to stay put.
- Kitchen drawer slides, which is how a kitchen fitter asks for the pair.
The H600 is a concealed two section drawer slide with a perforated mounting plate and a spring pin at the front end.
State the drawer box depth and the length wanted, and the pair is checked before it is packed.
Who Makes The Slide
The H600 is made by Guangzhou Gorgeous Intelligent Technology Co., Ltd. and exported under the Gorgeous Hardware name: three production bases in Guangdong, stamping, ball assembly and finishing in house.
The panels below are the plant and the paperwork behind every slide on this page.
Eighty Countries, Six Numbers
Three Production Bases
The Certificates, And What Each One Covers
Headquarters, Showrooms And Design
Where To Meet Us, March To December
Four Carton Options, And The Delivery Window
OEM, Brochures And Display
Frequently Asked Questions
How does the drawer stay on the slide?
The spring pin at the front end drops into the drawer box and holds it. Press the box on to fit it and release the pin to take it off.
Does the drawer come right out?
No. Two sections give a part extension, so the back of the box stays inside the cabinet. A three section slide is the part for full extension.
Is any of it visible?
No. The slide runs under the drawer box on the plate, so the drawer side is flat.
Are screws included?
No. Screws are quoted with the order if they are wanted in the same carton.
Is there a load rating?
The frames carry no load figure, so the rating is quoted on the order for the drawer the slide is going into.
Comprehensive score