0
image
image
image
image
wardrobe folding door slide

G-FD01 Wardrobe Folding Door Slide Kit

G-FD01
G-FD01 is a folding door slide kit: two full extension ball bearing slides with L shaped mounting plates, two cam hinges and a connecting bar, so a cabinet door folds and retracts to the side.
Country of Origin
China
Quantity:
Contact Now
add to cart
All Products

The G-FD01 Folding Door Slide Kit

The G-FD01 is the hardware that lets a cabinet door fold and then travel sideways out of the opening, which is how a tall larder shows its whole interior without a door standing in the room.

G-FD01 kit laid out: two slides with L plates, two hinges and the connecting bar

At A Glance

ItemG-FD01
KitTwo slides, two hinges, one connecting bar
SlidesBall bearing, full extension, zinc
HingesConcealed cup hinge with cam adjustment
PlatesL shaped, riveted to the slide
MountingInside a cabinet, side and back
FinishZinc, black hinge cup

What The Kit Contains

The parts arrive as one set rather than as separate catalogue items, because the three of them only work as a slide system together.

  • Two ball bearing slides, each carrying an L shaped plate with two rows of fixing holes.
  • Two concealed hinges with a cam on the cup and a cam on the arm, for lining the door up afterwards.
  • One slotted connecting bar that ties the two slides together so they move as one pair.

How The Door Travels

The hinge takes the door, the slides carry the door and hinge sideways, and the bar holds the two slides in step. A folding door slide works because all three are set on the same cabinet face.

  • The door folds back on its hinges first, so it clears the cabinet front before anything slides.
  • Then the folded door and hinge run sideways on the slides and sit beside the opening.
  • The bar keeps the top and bottom slides level with each other, which is what stops the door racking.
The G-FD01 slides and hinges fitted inside a cabinet

Full Extension, So The Door Clears

The slides run out over their whole length, so the folded door passes the cabinet side instead of stopping halfway and blocking the shelf.

  • A full extension slide puts the folded door past the cabinet frame, not inside the opening.
  • Ball cages carry the door weight along the slide rather than at one point.
  • The same travel lets the door be unhooked for cleaning or re-hanging.

Two Hinges, Cam Adjusted

The hinges are the part that makes the door sit flush again after the slides have been fitted, and that is the order the adjustment runs in.

  • The cup cam moves the door in and out of the cabinet face; the arm cam moves it up and down.
  • Both cams are reached with the door on, so the slide does not have to come off to line a door up.
  • The hinge cup is the black part in the photographs, and it takes a standard cup bore.
The G-FD01 hinge on its slide plate, showing the cam screws

Where It Goes

This is a slide kit for a tall cabinet with a door that has to disappear, not for a drawer.

  • Tall larders and pantry units, where a swing door would foul the room.
  • Wardrobes and storage walls built against a return wall.
  • Corner units and appliance housings that open to one side only.

Fitting Order

The sequence matters more than the tools, because the slides set the line and the hinges only trim it.

  • Fix the two slides to the cabinet first, square to the front edge, and set the bar between them.
  • Hang the door on the hinges with the door folded, then check the slide travel with the door still folded.
  • Adjust the cams last, and only after the slides run without a catch.

Ordering

The kit is chosen from the opening it has to cover, so the cabinet is measured before the slide is.

  • Give the cabinet opening width and the height of the door the slide has to carry.
  • State the door weight and the door thickness, because the hinge cup follows the thickness.
  • Say how many kits are wanted and whether the hinge cup should be black or zinc.

What Buyers Call It

The same kit is asked for under three names, and each of them describes a different part of the job.

  • A joiner ordering for a larder asks for a folding door slide and means this set.
  • A wardrobe maker calls the same kit a wardrobe folding door slide, because the door retracts beside the hanging space.
  • A small cabinet or a wall unit takes it as a flip up cabinet door slide, where the door lifts and then travels.

The G-FD01 is a folding door slide kit of two full extension slides, two cam hinges and a connecting bar.

State the opening width, the door height, weight and thickness, and the kits are made and packed.

Who Makes The Slide

The G-FD01 is made by Guangzhou Gorgeous Intelligent Technology Co., Ltd. and exported under the Gorgeous Hardware name: three production bases in Guangdong, with stamping, ball assembly and finishing in house.

The panels below are the plant and the paperwork behind every folding door slide on this page.

Eighty Countries, Six Numbers

Gorgeous Hardware world map of more than eighty export countries with six company statistics

Three Production Bases

Gorgeous Hardware factory gate and twelve production floor photographs from storage to container loading

The Certificates, And What Each One Covers

ISO 9001, ISO 14001 and ISO 45001 certificates with SGS, Intertek and RoHS test reports

Headquarters, Showrooms And Design

Guangzhou headquarters, hardware showroom, architectural display centre and design office

Where To Meet Us, March To December

Gorgeous Hardware trade show booths and the March to December exhibition calendar

Four Carton Options, And The Delivery Window

Four carton options from sticker service to OEM box and the six step delivery timeline

OEM, Brochures And Display

OEM logo on a hinge cup, brochure design pages and a branded display stand

Frequently Asked Questions

Are the hinges included?

Yes. Two cam hinges are part of the kit, because the folding door slide only works with the hinge carrying the door.

Will it take a heavy door?

No load figure is printed on the frames, so the rating is quoted on the order against the door the slide carries.

Can it be fitted to a drawer?

No. The plates and the bar are set out for a cabinet face; a drawer takes an ordinary drawer slide instead.

Does the door have to be cut for the hinge?

Yes. The cup needs a standard bore in the door, and the depth follows the door thickness.

Can the door be adjusted after fitting?

Yes. Both cams are reached with the door on, so the door is lined up on the slide without taking anything off.