G-H613 Two Section Pulley Drawer Slide
The G-H613 Two Section Drawer Slide
The G-H613 is a small slide, and it runs on a wheel rather than on balls. The inner section carries a nylon pulley at its end, and the outer channel is folded to guide it, which is why a light drawer opens with a steady pull instead of a rattle.
At A Glance
| Item | G-H613 |
| Material | Steel with baked enamel |
| Type | Two section pulley slide |
| Running gear | Nylon pulley wheel |
| Fixing | Slotted holes each section |
| Colours | White, cream |
| Packing | Pairs |
Why A Pulley, Not Balls
A wheel is the simpler answer for a small drawer slide. There is one moving part in each slide, so nothing falls out of a cage and nothing rattles when the drawer is half open.
- The pulley runs inside the folded channel of the slide, so dust and flour do not stop the slide the way they stop a dry ball cage.
- A nylon wheel keeps the slide quiet, which matters on a bedside or a desk drawer opened at night.
- The pull of the slide stays even along the whole travel, because the wheel is not fighting a return spring.
The Enamel Finish
The slide is painted and then baked, so the coating cures hard rather than drying in air.
- A baked film holds on the folded edge of the slide, which is where a wet paint film peels first.
- The colour is a finish, not a corrosion grade; a steel grade is quoted on request.
- The inside of the slide channel is painted too, so the wheel runs on a coated face rather than on bare steel.
Fitting The Runner
The slide fixes to the side of the drawer and to the carcass, and the slots take up the difference when the front is lined up.
- Set both slides level and at the same height before the drawer goes in.
- Use the slots in the slide to move the drawer up or down rather than redrilling the carcass.
- Keep the screws in the middle of each slot so there is room to adjust the slide later.
Where It Goes
This is a small drawer slide, used where the drawer is light and the opening is short.
- Bedside tables, desks, shoe cabinets and bathroom vanity units.
- A keyboard tray or a printer shelf that only needs a short travel.
- Not for a pan drawer or a drawer that is climbed on; a ball bearing slide is the part for those.
The Limits
Nothing printed on the frames is a load rating, so the figure comes from the order.
- No length and no load figure appear in the copy; both follow the drawer the slide goes into.
- The slide is two section, so the drawer does not come fully clear of the cabinet.
- The pair is the unit of sale; a single side is not supplied as a runner.
Ordering
The length is chosen against the drawer depth, so the depth is given with the enquiry.
- Give the drawer depth and the drawer width, and the length follows.
- Say how many pairs and which colour.
- Screws are quoted with the order if they are wanted in the same carton.
What Buyers Call It
The same runner is asked for under three names, and any of them reaches this slide.
- Two section drawer slide, when the travel and the number of sections are what the drawing calls out.
- Roller drawer slide, when a wheel is wanted rather than a ball cage.
- Mini drawer slide, when the drawer is small and a short runner is enough.
The G-H613 is a two section drawer slide with a nylon pulley wheel, a baked enamel finish and slotted fixing holes, sold in pairs.
State the drawer depth and the drawer width, and the pairs are made and packed.
Who Makes The Slide
The G-H613 is made by Guangzhou Gorgeous Intelligent Technology Co., Ltd. and exported under the Gorgeous Hardware name: three production bases in Guangdong, stamping, ball assembly and finishing in house.
The panels below are the plant and the paperwork behind every slide on this page.
Eighty Countries, Six Numbers
Three Production Bases
The Certificates, And What Each One Covers
Headquarters, Showrooms And Design
Where To Meet Us, March To December
Four Carton Options, And The Delivery Window
OEM, Brochures And Display
Frequently Asked Questions
What lengths are available?
The frames print a range of lengths rather than one figure, so the length is quoted against the drawer depth on the order.
Does the drawer come all the way out?
No. It is a two section slide, so the drawer stays supported by the outer section at full travel.
Is it a ball bearing slide?
No. It runs on a nylon pulley wheel inside the folded channel, which is the quieter arrangement for a light drawer.
Will the paint peel at the fold?
The finish is baked rather than air dried, which is what keeps the film on a folded edge.
Is one side supplied on its own?
No. The pair is the unit of sale, because a drawer needs a runner on each side.
Comprehensive score