0
image
image
image
image
kitchen drawer box

H510a Tall Metal Drawer Box

H510a
H510a is the tall box of the family: a raised steel side with a moulded end cap, a panel bottom, a clipped front connector and a runner in the set.
Country of Origin
China
Quantity:
Contact Now
add to cart
All Products

The H510a Tall Metal Drawer Box

The H510a is the tall box of the H500 family. The side stands higher than the standard box, so a pan, a bottle or a stack of plates stands inside the drawer instead of lying on its side.

H510a tall metal drawer box side pack

At A Glance

ItemH510a
MaterialSteel sides, panel bottom
TypeTall metal drawer box
SideRaised, moulded end cap
FrontClipped connector each side
ColoursGrey, white
PackingSets

Why A Taller Side

Height is what a pan drawer is bought for. A flat box holds plates, a tall drawer holds the pans that would otherwise be stacked on a shelf.

  • The raised side keeps a bottle or a jar upright while the drawer is pulled out.
  • The side is one pressing, so the extra height does not add a joint to the box.
  • The end cap is moulded over the top corner, which is the part that takes the knock on a tall drawer.

The End Cap

The cap closes the top corner of the side, and it is the detail that tells this box from a plain folded one.

  • A moulded cap covers the cut edge, so no bare steel faces the hand.
  • It carries the fixing for the front connector, so the front is set on the cap rather than on the sheet.
  • The same cap is used on both ends of the side.
The H510a side pack with its runners

Fitting The Box

The drawer is built on the bench and the front is set last, with the drawer closed in its opening.

  • Set the panel between the two sides and check the diagonals before the last screws go in.
  • Clip the front connector to the end cap and set the drawer on its runner.
  • Fit the front against the carcass so the gap is measured on the cabinet, not on the bench.
The H510a side from the front edge with its end cap

Where It Goes

This is a kitchen and furniture drawer, sold as a set of parts with its runner.

  • The tall side suits a pan drawer, a bottle drawer or a deep utensil drawer.
  • A drawer that is stood in or climbed on needs a heavier system than this one.
  • An insert or a cutlery tray is quoted separately and is not part of the set.

The Limits

Nothing printed on the frames is a specification, so the figures come from the order.

  • No length, no side height and no load figure appear on the frames; all three follow the cabinet opening.
  • The colour is a finish, not a steel grade; a grade is quoted on request.
  • The runner comes with the box, so a box on its own is not a complete drawer.

Ordering

The set is built to the opening, so the cabinet width, the drawer depth and the side height are agreed first.

  • Give the cabinet opening, the drawer depth and the depth of the drawer you are replacing.
  • Say how many drawers and which colour.
  • Screws and an insert are quoted with the order if they are wanted in the same carton.

What Buyers Call It

The same box is asked for under three names, and any of them reaches this drawer.

  • Metal sided drawer box, when the steel side is what the drawing calls out.
  • Drawer box and runners, when the whole set is bought rather than the box on its own.
  • Kitchen drawer box, when the drawer is going into a kitchen run rather than a cabinet unit.

The H510a is a tall metal drawer box with a raised steel side, a moulded end cap, a panel bottom, a clipped front connector and its runner.

State the cabinet opening, the drawer depth and the side height, and the sets are made and packed.

Who Makes The Box

The H510a is made by Guangzhou Gorgeous Intelligent Technology Co., Ltd. and exported under the Gorgeous Hardware name: three production bases in Guangdong, stamping, ball assembly and finishing in house.

The panels below are the plant and the paperwork behind every drawer on this page.

Eighty Countries, Six Numbers

Gorgeous Hardware world map of more than eighty export countries with six company statistics

Three Production Bases

Gorgeous Hardware factory gate and twelve production floor photographs from storage to container loading

The Certificates, And What Each One Covers

ISO 9001, ISO 14001 and ISO 45001 certificates with SGS, Intertek and RoHS test reports

Headquarters, Showrooms And Design

Guangzhou headquarters, hardware showroom, architectural display centre and design office

Where To Meet Us, March To December

Gorgeous Hardware trade show booths and the March to December exhibition calendar

Four Carton Options, And The Delivery Window

Four carton options from sticker service to OEM box and the six step delivery timeline

OEM, Brochures And Display

OEM logo on a hinge cup, brochure design pages and a branded display stand

Frequently Asked Questions

How tall is the side?

No side height is printed on the frames, so it is quoted on the order against the opening rather than taken from a chart.

Will it fit a standard pan drawer opening?

The set is made to the opening, so the cabinet width and the drawer depth are given with the enquiry and the box follows them.

Is a runner included?

The set is quoted with its runner, because the runner length follows the cabinet depth.

Can it be used for bottles?

Yes. The raised side is what holds a bottle upright while the drawer is pulled out.

What load does it carry?

The frames carry no load figure, so the rating is quoted on the order for the drawer the set is going into.