0
image
image
image
image
furniture drawer slides

H290 Stainless Steel Ball Bearing Drawer Slide

H290
H290 is a bright stainless slide on a cage of steel balls, side mounted on a stamped flange and built without a damper, so the drawer closes as it is pushed, supplied in pairs.
Country of Origin
China
Quantity:
Contact Now
add to cart
All Products

The H290 Plain Stainless Drawer Slide

The H290 is the plain slide in bright steel: two members running on a cage of balls, a pierced flange for the cabinet side, and no damper in it. Nothing has to be adjusted after the drawer is set, which is why it goes on cabinets that are cleaned and knocked about.

H290 stainless steel drawer slides in a pair

At A Glance

ItemH290
MaterialStainless steel
TypeBall bearing slide
MountingSide mount
DamperNone
FixingStamped slots and round holes
FinishBright
PackingPairs

Why Bright Steel

A bright slide suits a cabinet that is wiped down: there is no coating to chip at the edge of the flange.

  • The slide is bright through the section, so a scratch does not open a patch of a different colour.
  • A kitchen or workshop drawer slide gets washed and wiped, and bright steel is the finish that takes it.
  • Stainless steel drawer slides are asked for in pairs, and the pair is what is quoted.

The Ball Cage

A cage of steel balls runs between the two members of the slide and carries the drawer along the whole travel.

  • The cage makes the slide roll instead of rub, so the pull stays even once the drawer is loaded.
  • The balls are the wear part: a slide that is stiff on the bench is usually a cage out of line.
  • The cage is visible in the open slide, so a buyer can check it before the pair is packed.
The H290 slide with its ball cage open

The Stamped Flange

The flange carries stamped slots as well as round holes, and the two do different jobs.

  • The round holes set the position of the slide on the cabinet side.
  • The slots let the fixing be started and the slide dropped into line, which makes a replacement a one person job.
  • A side mount ball bearing drawer slide settles into the slots before the last screw is tightened.

No Damper, Plain Travel

There is no buffer in this slide, so the drawer closes at the speed the hand gives it.

  • Nothing on the slide pulls the drawer shut on its own, so a drawer that has to stay open stays open.
  • On a cabinet where a soft close is wanted, a buffered slide is the part to order rather than a damper fitted to this one.
  • The drawer box is the same either way, so the same carcass can take a plain slide or a buffered one.

Fitting It

The slide is only as good as the square of the cabinet, so the order of the work matters.

  • Set the cabinet side square and mark the drawer line before the first screw goes in.
  • Start the fixings in the slots, close the drawer, and let the slide find its line before tightening from the back forwards.
  • Open and close the loaded drawer once before sign off; a slide that rubs shows it in the first foot.
The H290 slide seen along the flange

The Limits

This is a cabinet slide and it is sold as one.

  • No length and no load figure are printed on the frames, so both are quoted on the order.
  • A drawer that is stood in or climbed on needs a heavier slide than this one.
  • The frames show one bright finish; where a different finish has to match a job, say so on the order.

Ordering

The slide is matched to the drawer box, so the box depth and the length wanted are agreed before the pair is packed.

  • Give the drawer box depth and the cabinet width with the enquiry, and the slide is matched to it.
  • Say how many pairs, because the two hands are packed together and quoted as a pair.
  • Screws are quoted with the order if they are wanted in the same carton.

What Buyers Call It

The same part is asked for under three names, and any of them reaches this slide.

  • Stainless steel drawer slides, when the finish is the reason for the order.
  • Side mount ball bearing drawer slides, when the fixing and the cage are what the drawing calls for.
  • Furniture drawer slides, which is how a furniture maker asks for the pair.

The H290 is a bright stainless ball bearing drawer slide with a side mount flange and no damper.

State the drawer box depth and the length wanted, and the pair is checked before it is packed.

Who Makes The Slide

The H290 is made by Guangzhou Gorgeous Intelligent Technology Co., Ltd. and exported under the Gorgeous Hardware name: three production bases in Guangdong, stamping, ball assembly and finishing in house.

The panels below are the plant and the paperwork behind every slide on this page.

Eighty Countries, Six Numbers

Gorgeous Hardware world map of more than eighty export countries with six company statistics

Three Production Bases

Gorgeous Hardware factory gate and twelve production floor photographs from storage to container loading

The Certificates, And What Each One Covers

ISO 9001, ISO 14001 and ISO 45001 certificates with SGS, Intertek and RoHS test reports

Headquarters, Showrooms And Design

Guangzhou headquarters, hardware showroom, architectural display centre and design office

Where To Meet Us, March To December

Gorgeous Hardware trade show booths and the March to December exhibition calendar

Four Carton Options, And The Delivery Window

Four carton options from sticker service to OEM box and the six step delivery timeline

OEM, Brochures And Display

OEM logo on a hinge cup, brochure design pages and a branded display stand

Frequently Asked Questions

Is the slide stainless?

Yes. This is the bright stainless slide in the range, and the pair is packed as one set.

Does it close softly?

No. There is no damper in it, so the drawer closes as it is pushed. The buffered slide in the range fits the same drawer box.

Can the drawer be taken out?

The drawer member lifts off once the fixing is released; there is no lever on this slide.

Are screws included?

No. Screws are quoted with the order if they are wanted in the same carton.

Is there a load rating?

The frames carry no load figure, so the rating is quoted on the order for the drawer the slide is going into.