Mini Short Keyboard Drawer Slide 25 mm G-H238
The G-H238 Mini Short Drawer Slide
The G-H238 is the small end of the range: a 25 mm wide slide, 461 mm long, with the sections measuring 252 mm and 172 mm. It is the part that goes where a standard cabinet slide will not fit, such as a keyboard tray or a shallow drawer under a desk.
At A Glance
| Item | G-H238 |
| Material | Steel |
| Overall length | 461 mm |
| Width | 25 mm |
| Section lengths | 252 mm and 172 mm |
| Finish | Bright steel |
| Packing | Pairs |
Where A 25 mm Slide Fits
The 25 mm width is the reason this slide exists: it sits inside a narrow drawer side or beside a keyboard tray where a wider cabinet slide would foul the carcass.
- A keyboard tray under a desk takes this slide without cutting into the leg room.
- A shallow desk drawer or a display pedestal drawer can be built around the 25 mm width.
- The 461 mm length covers a small drawer box without overhanging the back of the cabinet.
- A media unit or a computer desk takes the slide on the tray shelf without a visible bracket.
How It Runs
The runner is a steel section pair on a bright finish, and it is fitted to the side of the drawer box in the usual way.
- The sections run on the rail with the ball cage between them, so the drawer moves without scraping.
- The bright finish suits a drawer that is seen when it is open.
- Both slides of a pair are matched, so the drawer sits level once they are set.
- The rail is narrow enough that the drawer box keeps its full internal width.
Fitting It
A short slide has less room to absorb a bad fit than a long one, so it is worth setting it square before the screws go in.
- Hold both slides against the drawer box and mark through the holes before drilling.
- Keep the screws loose until the drawer runs without rubbing, then tighten.
- Check that the drawer box clears the carcass over the full travel of the slide.
The Limits
This is a light cabinet slide for a small drawer, and it is sold as one.
- No load figure is printed on the frames, so the rating is quoted on the order rather than claimed here.
- It is not the slide for a pan drawer, a tool chest or a drawer that is climbed on.
- For a full depth kitchen drawer, a wider cabinet slide is the right part.
Ordering
The slide is quoted from the drawing above, so the length and the width are stated rather than assumed.
- Give the drawer box depth so the 461 mm length can be confirmed against it.
- Slides are sold in pairs; say how many pairs rather than how many slides.
- Screws are quoted with the order if they are wanted in the same carton.
What Buyers Call It
The same short slide is asked for under several names, and any of them reaches this part.
- Mini drawer slides, when the compact body is the reason for the enquiry.
- Short drawer slides, when the length is what has to fit.
- Keyboard slides, when the tray under a desk is what the slide is going into.
The G-H238 is a mini short drawer slide, 25 mm wide and 461 mm long, in bright steel and supplied in pairs.
State the drawer box depth and the number of pairs, and the slide is checked before it is packed.
Who Makes The Slide
The G-H238 is made by Guangzhou Gorgeous Intelligent Technology Co., Ltd. and exported under the Gorgeous Hardware name: three production bases in Guangdong, stamping, ball assembly and finishing in house.
The panels below are the plant and the paperwork behind every slide on this page.
Eighty Countries, Six Numbers
Three Production Bases
The Certificates, And What Each One Covers
Headquarters, Showrooms And Design
Where To Meet Us, March To December
Four Carton Options, And The Delivery Window
OEM, Brochures And Display
Frequently Asked Questions
What drawer will this fit?
A small drawer box where a 25 mm wide slide is what the carcass allows, up to the 461 mm length on the drawing.
Is it sold as a pair?
In pairs. Say how many pairs, because the two slides of a pair are packed together.
Can it take a keyboard tray?
That is what the short length is usually bought for, under a desk or inside a computer cabinet.
Are screws included?
No. Screws are quoted with the order if they are wanted in the same carton.
Is a load rating available?
The frames carry no load figure, so the rating is quoted on the order for the drawer it is going into.
Comprehensive score