Quick Release Concealed Drawer Slide G-H632
The G-H632 Quick Release Concealed Slide
The G-H632 is the concealed slide with a release: the runner sits in a perforated plate under the drawer box, and the red clip at the end of the slide is the point where the drawer lets go of the slide. That one detail is what makes a fitted kitchen drawer removable without tools.
At A Glance
| Item | G-H632 |
| Material | Steel |
| Type | Concealed slide with release clip |
| Mounting | Bottom mount, under the drawer box |
| Fixing | Perforated mounting plate |
| Finish | Bright steel |
| Packing | Pairs |
What The Red Clip Does
The red clip sits at the cabinet end of the slide and it is the release for the slide, which is why it is the one part of the slide a fitter touches after installation.
- Press the clip and the slide lets go of the plate, so the drawer box lifts out of the slide.
- The clip is plastic and it is set proud of the steel, so it can be found by feel under a loaded drawer.
- The drawer goes back on by lining the plate up and pressing until the clip catches.
Concealed Under The Drawer
The rail runs under the drawer box instead of along its side, so the fitting is out of sight once the drawer is in the cabinet.
- There is no side clearance to cut into the drawer box, so the box keeps its internal width.
- The drawer front is the only thing a customer sees, which is what a clean interior is judged on.
- The slide travels in the plate, which keeps the drawer square as it comes out.
What The Mounting Plate Does
The perforated plate is the interface between the slide and the drawer box, and the hole pattern sets the fixing positions.
- The plate spreads the load over the drawer bottom rather than pulling on two or three screws.
- The holes take a standard screw, so no special fixing is needed.
- The plate is the part that stays in the cabinet when the drawer is lifted off the slide.
Fitting It
The plate goes on the drawer box first, and the slide is set from the plate rather than from the cabinet side.
- Fix the plate, then check the box sits square before the cabinet side is drilled.
- Keep the screws loose until the drawer runs without rubbing, then tighten from the back forwards.
- Press the clip once with the drawer fitted, to confirm it releases before the job is signed off.
The Limits
This is a cabinet slide and it is sold as one.
- No length and no load figure are printed on the frames, so both are quoted on the order.
- The clip is a release, not a lock; if the drawer has to stay captive, say so on the order.
- A drawer that is stood in or climbed on needs a heavier slide.
Ordering
The slide is matched to the drawer box, so the depth and the plate pattern are agreed on the order.
- Give the drawer box depth and width with the enquiry, and the slide is matched to it.
- Say how many pairs, because the two slides of a pair are packed together.
- Screws are quoted with the order if they are wanted in the same carton.
What Buyers Call It
The same slide is asked for under several names, and any of them reaches this part.
- Quick release drawer slides, when the clip is the reason for the order.
- Bottom mount drawer slides, when the fixing under the box is what the job needs.
- Concealed drawer runners, which is how the same part is listed on a European trade page.
The G-H632 is a concealed bottom mount drawer slide with a red release clip and a perforated mounting plate.
State the drawer box depth and width, and the slide is checked before it is packed.
Who Makes The Slide
The G-H632 is made by Guangzhou Gorgeous Intelligent Technology Co., Ltd. and exported under the Gorgeous Hardware name: three production bases in Guangdong, stamping, ball assembly and finishing in house.
The panels below are the plant and the paperwork behind every slide on this page.
Eighty Countries, Six Numbers
Three Production Bases
The Certificates, And What Each One Covers
Headquarters, Showrooms And Design
Where To Meet Us, March To December
Four Carton Options, And The Delivery Window
OEM, Brochures And Display
Frequently Asked Questions
Can the drawer be taken out?
Yes. Press the red clip at the cabinet end of the slide and the drawer lifts off the slide.
Where does the slide sit?
Under the drawer box, on the perforated plate, so nothing shows at the side.
Does the clip lock the drawer?
No. It holds the box on the slide; it is a release, not a lock.
Are screws included?
No. Screws are quoted with the order if they are wanted in the same carton.
Is there a load rating?
The frames carry no load figure, so the rating is quoted on the order for the drawer it is going into.
Comprehensive score