0
image
image
image
image
black drawer slides

Self Closing Drawer Slide Single Spring Buffer 4510

4510
4510 is a steel drawer slide with a single spring buffer, three fold ball bearing runner in bright or black finish, full extension and side mounting, for kitchen drawers, cabinet drawers and workshop storage.
Country of Origin
China
Quantity:
Contact Now
add to cart
All Products

The 4510 Single Spring Buffer Drawer Slide

The 4510 is a three fold drawer slide with one spring buffer in the housing: the spring takes the last part of the close, so the drawer settles instead of banging. It is made in bright steel and in black, and both are the same body.

4510 steel drawer slide pair, three fold runner extended

At A Glance

Item4510
MaterialSteel
TypeThree fold ball bearing slide
BufferSingle spring
ExtensionFull
MountingSide mount
FinishBright steel or black

How The Single Spring Buffer Works

One spring sits in the buffer housing at the cabinet end of the slide and is compressed as the drawer comes in.

  • The slide takes the drawer over the last part of the travel and holds it shut.
  • One spring per side keeps the pull even, so the drawer does not come in at an angle.
  • There is nothing to set on site; the buffer is assembled and checked at the factory.

Two Finishes, One Slide

The bright finish is the standard part, and the black finish is the same body with a black coating over it.

  • Bright steel suits a cabinet where the slide is seen when the drawer is open.
  • Black suits a dark carcass, a workshop bench or a display unit with black fittings.
  • Both finishes are packed in the same carton count, so a mixed order ships together.

What Full Extension Gives You

A three fold slide carries the drawer out to full extension, so the back of the drawer comes up rather than staying under the counter.

  • The whole drawer box is reachable, which matters on a deep pan drawer.
  • Both outer sections stay supported at full travel, so the drawer does not dip at the end.
  • The runner is screwed to the side of the drawer box, which suits a standard cabinet build.
Close up of the 4510 slide, rail face, mounting holes and buffer housing

Fitting It

The slide is fitted level and square, and a slide that runs badly is almost always one that was not.

  • Set both slides on the drawer box before either is screwed down.
  • Keep the screws in the slotted holes until the drawer runs true, then tighten.
  • Leave the buffer end clear so the drawer travels fully home.

The Limits

This is a cabinet slide and it is sold as one.

  • No load figure is printed on the frames, so the rating is quoted on the order rather than claimed here.
  • It is not a runner for a vehicle, a tool chest or an industrial rack.
  • For a drawer that is stood in or climbed on, a heavier slide is the right part.
The 4510 slide extended, inner member and side mount holes

Sizes And Ordering

The slide is made to the cabinet, so the length follows the drawer depth instead of being guessed.

  • Give the drawer depth with the enquiry and the length is matched to it.
  • Say whether the finish is bright or black, because they are packed from the same line.
  • Slides are sold in pairs, and screws are quoted with the order if they are wanted in the carton.

What Buyers Call It

The same slide is asked for under several names, and any of them reaches the same part.

  • Self closing drawer slides, when the spring action is the point of the order.
  • Black drawer slides, when the finish is what the job is matched to.
  • Full extension drawer slides, when the travel is what the buyer is comparing.

The 4510 is a steel drawer slide with a single spring buffer, three fold, full extension and side mount.

State the drawer depth, the finish and the number of pairs, and the slide is checked before it is packed.

Who Makes The Slide

The 4510 is made by Guangzhou Gorgeous Intelligent Technology Co., Ltd. and exported under the Gorgeous Hardware name: three production bases in Guangdong, stamping, ball assembly and finishing in house.

The panels below are the plant and the paperwork behind every slide on this page.

Eighty Countries, Six Numbers

Gorgeous Hardware world map of more than eighty export countries with six company statistics

Three Production Bases

Gorgeous Hardware factory gate and twelve production floor photographs from storage to container loading

The Certificates, And What Each One Covers

ISO 9001, ISO 14001 and ISO 45001 certificates with SGS, Intertek and RoHS test reports

Headquarters, Showrooms And Design

Guangzhou headquarters, hardware showroom, architectural display centre and design office

Where To Meet Us, March To December

Gorgeous Hardware trade show booths and the March to December exhibition calendar

Four Carton Options, And The Delivery Window

Four carton options from sticker service to OEM box and the six step delivery timeline

OEM, Brochures And Display

OEM logo on a hinge cup, brochure design pages and a branded display stand

Frequently Asked Questions

What length should I order?

The length follows the drawer depth, so give the depth with the enquiry and the slide is matched to it.

Bright or black, which one?

The same slide either way. Pick the finish that matches the carcass; both are packed together.

Does the spring close the drawer fully?

It pulls the drawer in over the last part of the travel and holds it shut. It does not open by itself.

Are screws included?

No. Screws are quoted with the order if they are wanted in the same carton.

Can it go in a bathroom or a boat?

The grade is quoted on the order, so say where the slide is going before the carton is made up.