0
image
image
image
image
ball bearing drawer slides

Stainless Steel Soft Close Drawer Slide Three Fold G-HSC

G-HSC
G-HSC is a stainless steel soft close drawer slide, three section ball bearing runner with full extension and side mounting, for kitchen drawers, cabinet drawers and workshop storage.
Country of Origin
China
Quantity:
Contact Now
add to cart
All Products

The G-HSC Soft Close Drawer Slide

G-HSC is a stainless steel drawer slide: three sections running on ball bearings, a damper at the end of the travel that takes the last part of the close out of the hand, and a bright brushed rail that will not spot in a kitchen or a damp workshop.

G-HSC stainless steel soft close drawer slide, pair of three section rails

At A Glance

ItemG-HSC
MaterialStainless steel
TypeThree section ball bearing slide
ExtensionFull
MountingSide mount
ClosingSoft close damper
FinishBright brushed

How The Soft Close Works

The damper sits at the cabinet end of the slide and catches the drawer over the last part of the travel.

  • Push the drawer shut and the slide takes over, pulling it in without a bang.
  • The slide is handed the same way on both sides, so a pair closes evenly.
  • There is no catch to adjust on site; the damper is set at the factory.

Why Stainless

A plated slide starts to spot where the plating wears, which is along the ball track and at the mounting holes, and that is exactly where a drawer slide is worked hardest.

  • The stainless slide can be used in a kitchen, a bathroom or a utility room without rust at the track.
  • There is no coating to flake off into the drawer.
  • It is the right slide for a coastal job, where a plated runner rusts inside a season.

What The Three Sections Do

A three section slide carries the drawer out to full extension, so the back of the drawer comes into reach rather than staying under the counter.

  • The drawer box comes clear of the carcass, which matters for a deep pan drawer.
  • Both sections stay supported at full travel, so the drawer does not drop at the end.
  • The slide is mounted on the side of the drawer box, which suits a standard cabinet build.
Close up of the G-HSC slide, ball track, mounting holes and damper

Fitting It

The slide is fitted level and square, and most complaints about a slide that runs badly come from one that was not.

  • Line the two slides up on the drawer box before either is screwed down.
  • Keep the screws in the slotted holes until the drawer runs true, then tighten.
  • Leave the damper end clear so the drawer travels fully home.

The Limits

This is a cabinet slide and it is sold as one.

  • No load figure is printed on the frames, so the rating is quoted on the order rather than claimed here.
  • It is not a drawer runner for a vehicle, a tool chest or an industrial rack.
  • For a drawer that is stood in or climbed on, a heavier slide is the right part.
The G-HSC slide from the side, full extension and side mount holes

Lengths And Ordering

The slide is made to the cabinet, so the length is quoted rather than guessed.

  • State the drawer depth and the length is matched to it.
  • Slides are sold in pairs; say how many pairs rather than how many slides.
  • Screws are not included unless they are asked for on the order.

What Buyers Call It

The same slide is asked for under several names, and any of them reaches the same part.

  • Soft close drawer slides, when the closing action is the point of the order.
  • Stainless steel drawer slides, when the material is the reason for the enquiry.
  • Ball bearing drawer slides, when smooth travel under load is what the buyer is comparing.

G-HSC is a stainless steel soft close drawer slide, three section, full extension and side mount.

State the drawer depth, the number of pairs and whether screws travel with them, and the slide is checked before it is packed.

Who Makes The Slide

G-HSC is made by Guangzhou Gorgeous Intelligent Technology Co., Ltd. and exported under the Gorgeous Hardware name: three production bases in Guangdong, stamping, ball assembly and finishing in house.

The panels below are the plant and the paperwork behind every slide on this page.

Eighty Countries, Six Numbers

Gorgeous Hardware world map of more than eighty export countries with six company statistics

Three Production Bases

Gorgeous Hardware factory gate and twelve production floor photographs from storage to container loading

The Certificates, And What Each One Covers

ISO 9001, ISO 14001 and ISO 45001 certificates with SGS, Intertek and RoHS test reports

Headquarters, Showrooms And Design

Guangzhou headquarters, hardware showroom, architectural display centre and design office

Where To Meet Us, March To December

Gorgeous Hardware trade show booths and the March to December exhibition calendar

Four Carton Options, And The Delivery Window

Four carton options from sticker service to OEM box and the six step delivery timeline

OEM, Brochures And Display

OEM logo on a hinge cup, brochure design pages and a branded display stand

Frequently Asked Questions

What length should I order?

The length follows the drawer depth, so give the depth with the enquiry and the slide is matched to it.

Are slides sold singly or in pairs?

In pairs. Say how many pairs, because the two slides of a pair are packed together.

Does it close on its own?

It pulls itself in over the last part of the travel. It does not open by itself.

Will it rust in a bathroom?

The rail is stainless steel, so it will not spot like a plated slide in a damp room.

Are screws included?

No. Screws are quoted with the order if they are wanted in the same carton.